2003 Chevy TrailBlazer 2WD Cooling System – Electro-Viscous Fan Clutch Operation
download Subject: Operating Characteristics of the Electro-Viscous (EV) Fan Clutch and Diagnostic Tips for Cooling Fan Noise, Delayed Transmission Shifts and/or Engine Revving Too High Models:...
View Article2000 Honda Accord EX HUB & KNUCKLE ASSEMBLY
download Removal (Except Odyssey & S2000) 1. Loosen lug nuts with vehicle weight on tires. Pry lock tab away from spindle nut, and loosen nut. Raise and support vehicle. Remove lug nuts and spindle...
View Article2004 Saturn VUE Lower Ball Joint Replacement Removal Procedure
download 1. Remove the lower control arm. 2. Place the control arm in a vise or suitable holding device. 3. Remove the ball joint rivets using the following procedure. 3.1. Drill through the rivets...
View Article2004 Ford Taurus Ball Joint REMOVAL AND INSTALLATION
download 1. Remove the wheel knuckle. For additional information, refer to Wheel Knuckle in this section. 2. Remove the snap ring. CAUTION: To avoid damage to the components, do not use heat to aid...
View Article2003 Ford Escape Front Drive Halfshafts DISASSEMBLY AND ASSEMBLY
download Disassembly 1. Remove the halfshaft. For additional information, refer to Halfshaft in this section. 2. Secure the halfshaft and constant velocity (CV) joint in a vise using protective jaw...
View ArticleFord Ranger upper ball joint replacement 1998-2002 Ford Ranger 2 wheel drive
download Repair Procedure: 1. Raise vehicle on hoist, and support lower control arm. 2. Remove wheel and tire assembly. 3. Mark position of upper eccentric camber bolts. 4. Remove upper ball joint...
View Article1997 Ford F-250/350/Super Duty Steering Knuckle Removal Installation
download Removal 1. Remove the front wheel spindle (3105) and the right and left shaft and joint assembly. Refer to Spindle, RH and LH Shaft and Joint Assembly in the Removal and Installation portion...
View ArticleFord Ranger upper ball joint replacement
download Subject: Ford Ranger upper ball joint replacement Vehicle involved: 1998-2002 Ford Ranger 2 wheel drive Condition: O.E.M. supplier sells the upper ball joint as an arm assembly; we sell the...
View Article2002 Ford Explorer Ball Joint Removal and Installation
download 1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02. 2. Remove and discard the nut. 3. NOTE: The wheel speed sensor connectors are...
View Article1994 Ford Pickup F150 BALL JOINT Removal Installation
download NOTE: Always remove lower ball joint before removing upper ball joint. Install lower ball joint before installing upper ball joint. DO NOT heat ball joint or axle to aid in installation....
View Article
